Stand-alone
Access Control
TAG-IN-A-BAG
Stand-alone proximity
access control system
DESCRIPTION
TAG-IN-A-BAG™ is the
ideal stand-alone proximity system for commercial, industrial and
residential applications. This stand-alone system can be used at a single
door. There is no need for a computer or programming.
This
unit comes with a programming card that you actually use to initiate
programming. Then, present your tags to the reader and they are programmed
automatically. You can then delete them in the same manner.
We
furnish an electric strike and a plug in power supply. Save on expensive
lock re-keying and maintain your own system. And there is no virtually no
wiring involved. Save on installation as well.
The
system, which is based on advanced RFID technology, contains a built-in
high-power relay. There's no need for an external reader or a computer to
complicate wiring or setup. Up to 250 unique tags and their individual
access codes can be added or deleted directly at the keypad.
Unit
comes with keypad that is actually a proximity reader and 10 tags. You can
have your personnel use both the keypad and proximity reader for added
security , or use just the proximity reader. Also for added security, you
can position this unit indoors and purchase an RDR1B (see RDR1 following
these specifications.)
APPLICATIONS
Warehouses and stockrooms
Laboratories
Clinics
Offices
Archives
Computer rooms
FEATURES
* Advanced RFID technology
* Up to 250 user tags and PIN codes
* A unique ID code for each tag, from more than a trillion combinations
* Tag-only or tag-plus-PIN code operation
* Fast and easy installation
* Programmable directly at the keypad
* For indoor or outdoor use; weatherproof
* Can be integrated with an alarm system
* Outputs for door ajar, tamper, auxiliary, panic and forced door entry
SPECIFICATIONS
Power input: 12-16V DC or
9-12V AC
Current Consumption: 200 mA
Display: 2 x 7 segments and 3 LEDs
Buttons: 12 (numeric keypad)
Memory capacity: 250 tag codes
Tag reading range: 50-100 mm (2-4 in)
Internal tag reader frequency: 125 KHz
Tag codes possibilities: more than a trillion possible combinations
Inputs:
Request-to-exit: (NO), dry contact
Door position: (NC), dry contact
Outputs:
Lock relay NO/NC dry contact, 10A/28V AC or DC
Door ajar/door held open (open collector output), 100mA max
Panic (open collector output), 100mA max
Auxiliary (open collector output), 100mA max
Forced Entry (open collector output), 100mA max
Tamper (NC dry contact). Tamper switch is designed to detect attempts to
open the unit, or remove it from the wall.
Operating temperature: -20°C to 50°C (-4°F to 122°F)
Dimensions (H x W x D): 122 x 82 x 31 mm (4-13/16 x 3-1/2 x 1-1/4 in)
Weight: 170 g (6 oz) without rubber gasket
Color: Dark gray
RDR-1
External proximity
reader for TAG-IN-A-BAG
 APPLICATIONS
For use with TAG-IN-A-BAG™
access control systems
FEATURES
* Designed for external use
with TAG-IN-A-BAG™
* For indoor or outdoor use
* Allows controlled access in and out of secured area
DESCRIPTION
RDR-1 is an external
proximity reader, compatible with the TAG-IN-A-BAG™ (TIAB) single door
access control system. TIAB has an internal proximity tag reader. For
installations in which an additional reader is required, the external reader
RDR-1 can be used. The external reader is connected to the TIAB control unit
by four color-coded wires.
It is recommended to install RDR-1 on a wall outside the protected area, and
the TIAB control unit inside the protected area.
SPECIFICATIONS
Indicators: Tricolor LED
(Green, Red, Amber)
Tag reading range: 50-100 mm (2-4 in)
Reader frequency: 125 kHz
Tag code possibilities: Over trillion possible combinations
Operating temperature: -20°C to 50°C (-4°F to 122°F)
Dimensions (L x W x D): 116 x 70 x 17 mm (2-3/4 x 4-1/2 x 5/8 in)
Weight: 121.5 g (4.3 oz)
Color: Dark gray
Maximum cable length between RDR-1 and TIAB: 10 m (32 ft)
Minimum distance between RDR-1 and TIAB: 61 cm (2 ft)
Compliance with standards: Complies with Part 15 of the FCC Rules and
RSS-210 of Industry and Science Canada. Operation is subject to the
following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Tags
Proximity tags
 APPLICATIONS
For use with stand alone
proximity systems
DESCRIPTION
The proximity tags are
totally sealed and do not require any maintenance. The tags are powered from
the RF signal transmitted from the proximity reader. To open a door, the
user simply holds the tag in front of the wall-mounted proximity reader. A
single tag can be conveniently programmed to open any combination of doors
on the system. Because each tag is unique, it cannot be duplicated. If a tag
is lost or stolen, it can easily be deleted from the system.
SPECIFICATIONS
Unique card ID: Out of more
than trillion combinations
Frequency: 125 kHz
Dimensions (L x W x D): 53 x 35 x 7 mm (2 1/8 x 1 3/8 x 9/32 in)
Weight: 5.5 g (0.2 oz)
Color: Dark gray
Lifetime Warranty
CL-8
Microprocessor-controlled
indoor digital keypad
APPLICATIONS
Access control
Secured electrical switching
Residential, commercial, industrial
FEATURES
* Suitable for flush and
surface mounting - mounting box included
* Identifies entry under duress
* Fully programmable from the keyboard
* Stored data unaffected by power failures
* More than 100 million possible code combinations
* Up to 56 different user codes can be programmed
* User codes may be individually canceled
* Programmable relay closure duration or toggle (latch) mode
* Each user code is programmable to operate the relay, or the auxiliary
output, or both
* Request-to-Exit input operates the relay from a remote switch, PIR, etc.
* Auxiliary open-collector output with seven powerful programmable operating
modes
* 12-V AC/DC operation
DESCRIPTION
The CL-8 is a
microprocessor-controlled digital keypad designed for access control and/or
secured switching applications.
CL-80
Outdoor/ indoor access
control keypad
 APPLICATIONS
Residential, commercial,
industrial, institutional
FEATURES
* Weatherproof, in
accordance with IP54
* Tamper output
* Fully programmable
* Up to 56 different, one to eight-digit user access codes
* More than 100 million possible code combinations
* EEPROM stores data, unaffected by power failure
* Lockout option, designed to defeat code breakers
DESCRIPTION
The CL-80 is a stand-alone
digital keypad for access control applications. It is weatherproof (IP54)
for outdoor/indoor use. It activates a built-in, high-powered relay and
operates from a 12/24 V AC or DC power supply. The CL-80, permits up to 56
individual access codes.
The CL-80 can be integrated with an alarm system for enhanced security. The
tamper switch output can trigger the alarm system. The panic output can also
activate the alarm. Data is entered into the EEPROM unaffected by power
Contact
M. Spinello and Son for further information on the Visonic Stand Alone
Access Control Systems at
815-963-0495
|
